Burien, WA
Heat Pump Repair and Replacement in Burien, WA
Heat pump repair in Burien, WA starts by telling a normal defrost cycle or auxiliary-heat run from one that is a fault. Burien has, on average, 25 days a year with a low of 32°F or colder and about one at 20°F or colder (NOAA 1991–2020 normals, station 3 miles away). Half the homes in Burien were built before 1965 (Census ACS 2019–2023), so in many of them the heating and cooling equipment has been replaced at least once while the ducts and the flue have not. The federal minimum for a split heat pump made since January 1, 2023 is 14.3 SEER2 in cooling and 7.5 HSPF2 in heating, nationwide.
(888) 217-3739Washington contractors. No obligation for the call.
Air that feels cool at the vents in winter is usually the heat pump working as designed, and a heat pump that sits on auxiliary heat for hours in mild weather usually is not. Say what the thermostat is showing and a heating and cooling contractor can come out to Burien and tell the two apart.
In Burien the cooling season is the year and the heating season is a handful of mornings. What a no-heat call means here depends on what else the house has: where there is a furnace, the heat pump has something to hand the load to, and where there is none — and in this climate plenty of houses have none — the only thing behind it is a bank of electric resistance strips. That is the first thing a technician establishes, because there is no second appliance to switch to.
That makes the sizing question run the opposite way from a cold climate: the cooling load sets the size, exactly as it would for an air conditioner, because it is the load that exists for most of the year — which is correct, and it also means that on the handful of genuinely cold mornings the machine runs without stopping and the strips carry what it cannot. Continuous running on a cold morning is the machine doing its job, not failing at it.
A heat pump runs outdoors in both halves of the year, so salt air has far longer at its fins and its cabinet than it gets at a machine that only cools, and a coil losing its aluminum fins loses capacity long before it loses refrigerant.
Burien, WA in numbers
| Days a year with a low of 32°F or colder | 25 | NOAA 1991–2020 normals, station 3 miles away |
|---|---|---|
| Days a year with a low of 20°F or colder | 1 | NOAA 1991–2020 normals |
| Average July dew point | 53°F | PRISM 1991–2020 normals |
| Median year homes were built | 1965 | Census ACS 2019–2023 |
| Households | 19,843 | Census ACS 2019–2023 |
| County | King County | Census Bureau |
| Federal minimum for a new split central AC | 13.4 SEER2 (North region) | DOE, 2023 standard |
Why heat pumps do not fix themselves
The parts that cycle are the ones that go first, and they do not go alone. A run capacitor that has lost capacitance does not shut the compressor down — it raises the current the compressor draws every minute it runs, and the heat that comes with it. A heat pump asks for that on the heating side as well as the cooling one, where an AC only ever runs to cool, so the part that fails at the end of it is not the capacitor. A capacitor is a part; a compressor is a large fraction of the machine, and on a system installed before 2010 that is where the conversation turns to replacement.
When to stop and call in Burien
- Ice covers the outdoor coil and the defrost cycles are not clearing it.
- It cools in summer but will not heat, or it heats but will not cool.
- The breaker feeding the outdoor unit or the air handler will not stay in.
- The license
- Held by the contractor, not by this site, and issued where the work happens — Washington licenses at state level, at city level or not at all depending on the trade and the town. Ask for the number and the name it is held under: a trading name and the licensed entity are often not the same.
- The figure
- Set by the contractor and said before the work starts. This site never quotes and has no part in it. If a technician cannot say what the visit covers before beginning, that is the moment to stop.
- The call
- Describing what the system is doing commits you to nothing. Nothing is booked until you say so.
What a visit in Burien involves
- 01
The finding, out loud
What failed, whether it is the fault or a symptom of another one, and whether the repair suits the age of the system. A diagnostic visit is usually charged separately from the repair — ask whether it is credited if the work goes ahead, because that differs from one contractor to the next.
- 02
The repair
Agreed with the contractor before it starts. Where a part has to be ordered, a technician says so rather than leaving the system apart.
- 03
What happens after
A system that failed once in a season often fails again in it. Whether that is the same fault or a second one is worth asking while the technician is still there.
What to have ready when you call
- 01That it is a heat pump, and what the backup is — electric, or a gas furnace on the same ducts, and not knowing is a fair answer.
- 02Roughly when it was installed, and what the outdoor data plate says it is charged with — R-410A on most systems in service, R-454B on recent ones.
- 03The address and ZIP code, and how the outdoor unit is reached — a locked gate, a dog or deep snow changes the appointment.
Emergency heat is what that setting is for if the house has gone cold, but say on the phone that you switched to it, because it locks out the compressor, and the fault a technician needs to watch stops happening while it is on.
Heat Pumps in Burien: questions
How cold does Burien get in winter?
Burien averages 25 days a year with a low of 32°F or colder and 1 at 20°F or colder, by the 1991–2020 climate normals for a NOAA station 3 miles away. Heating is a handful of mornings here, so a heat pump spends nearly the whole year cooling.
What is the July dew point in Burien?
The July dew point in Burien averages 53°F, by the PRISM 1991–2020 climate normals. In air that dry most of the cooling load is heat, and an air conditioner removes little water, so sizing turns on the house and its sun more than on humidity.
How efficient must a new heat pump in Burien be?
The federal minimum for a split heat pump made since January 1, 2023 is 14.3 SEER2 for cooling and 7.5 HSPF2 for heating, the same in Washington as in every other state. A contractor can quote above the minimum; the rating is on the unit's label and on the AHRI certificate for the matched pair.
Other services in Burien
Heat Pumps nearby