HeatCoolHQ heatcoolhq.com (888) 217-3739

Franklin, MO

Furnace Replacement and Installation in Franklin, MO

A new furnace in Franklin, MO is sized from the house, its ducts and its winters, not from the rating plate of the one coming out. Franklin has, on average, 113 days a year with a low of 32°F or colder and 41 at 20°F or colder (NOAA 1991–2020 normals, station in or next to town). Half the homes in Franklin were built before 1980 (Census ACS 2019–2023). The federal minimum for a new non-weatherized gas furnace is an AFUE of 80, and a 95 standard for furnaces made after December 18, 2028 is still in court.

(888) 217-3739

Missouri contractors. No obligation for the call.

The year in Franklin—both systems work a real season
The year in Franklin. both systems work a real season. There is no month when both systems are idle. BELOW FREEZINGJFMAMJJASOND
heatingcoolingbelow freezing113 days below freezing · July dew point 67°F
Two technicians easing a furnace cabinet down a basement stairway
A replacement cabinet coming off the dolly. How the unit gets in is part of the job: a turn in the stairs or a narrow doorway can decide which model fits.

A furnace that has failed once and a furnace on its second service call this season are two different questions. Say when it went in, roughly, and what it is doing now, and a heating contractor can come out to Franklin and answer that before anything is ordered.

In Franklin both halves of the heating and cooling system do real work, and a contractor usually installed them in the same week. Most people miss that when they weigh the furnace on its own: the indoor coil sits in the same cabinet, and it is the same age.

The coil ages on a schedule of its own. Most systems still running in houses are charged with R-410A, and the oldest are on R-22: less R-410A is made each year, production of R-22 ended in 2020, and a recharge of either costs more each season than the one before. It stays a repair question until the furnace beside it fails as well.

A changeout is the one visit where a second question is genuinely open, and nights below 20°F come often enough here to put it there: another gas furnace, or a heat pump with the furnace kept behind it. A heat pump working alone hands the shortfall to electric resistance strips on those nights, and the electric bill follows. What a contractor means by dual fuel is keeping the furnace as the backup instead of strips, and the thermostat, the wiring and the gas connection are all apart on changeout day anyway.

Franklin, MO in numbers

Days a year with a low of 32°F or colder113NOAA 1991–2020 normals, station in or next to town
Days a year with a low of 20°F or colder41NOAA 1991–2020 normals
Average July dew point67°FPRISM 1991–2020 normals
Median year homes were built1980Census ACS 2019–2023
Households37Census ACS 2019–2023
CountyHoward CountyCensus Bureau
Federal minimum for a new split central AC13.4 SEER2 (North region)DOE, 2023 standard

Why furnaces do not fix themselves

A crack in a heat exchanger does not stay the size it was found at. Every heating cycle opens it further, because heat moves the steel and the crack is where that movement collects.

A technician at an indoor air handler

When to stop and call

  • The gas utility has tagged the furnace and shut the supply off.
  • A technician has said the words heat exchanger, or a carbon monoxide alarm has gone off.
  • Flame rolls out of the burner opening, or there is soot around the furnace door.
The license
Held by the contractor, not by this site, and issued where the work happens — Missouri licenses at state level, at city level or not at all depending on the trade and the town. Ask for the number and the name it is held under: a trading name and the licensed entity are often not the same.
The call
Describing what the system is doing commits you to nothing. Nothing is booked until you say so.
Coverage
By town, not by region. Franklin and the towns around it, and it shifts with who is taking calls at the hour you ring.

What the visit involves

  1. 01

    The diagnosis

    At the thermostat first, then at the furnace or the condenser, in the order the equipment runs. What the system is doing is established before any part is named.

  2. 02

    The finding, out loud

    What failed, whether it is the fault or a symptom of another one, and whether the repair suits the age of the system. A diagnostic visit is usually charged separately from the repair — ask whether it is credited if the work goes ahead, because that differs from one contractor to the next.

  3. 03

    The repair

    Agreed with the contractor before it starts. Where a part has to be ordered, a technician says so rather than leaving the system apart.

Before you call: what to have ready

  1. 01When the furnace went in, roughly, and its model number — the data plate inside the door carries both.
  2. 02Whether the gas utility has been out, and what the tag says word for word — the tag usually names the component.
  3. 03Whether the same ductwork also cools the house, and what the outdoor data plate lists as the refrigerant — R-410A, R-454B or R-22 — and the model number on that unit, which tells a contractor whether it only cools or heats as well.

Have the data plate from inside the furnace door in front of you, because it answers half the call — the year it went in and the model number. And if the gas utility left a tag on the appliance, leave the tag where it is: it names what has to be put right before the gas comes back.

Furnace Replacement in Franklin: questions

How cold does Franklin get in winter?

Franklin averages 113 days a year with a low of 32°F or colder and 41 at 20°F or colder, by the 1991–2020 climate normals for the NOAA station in or next to town. Both halves of the system work hard here, and the heating side runs for months rather than weeks.

How old are the homes in Franklin?

Half the homes in Franklin were built before 1980, by the Census Bureau's 2019–2023 American Community Survey. Detached houses make up about half of the housing. Equipment in houses of that age is often on its second set, and the install date on the label decides whether parts are still made. Manufactured homes are common enough here that a packaged unit outside, feeding a duct under the floor, is worth mentioning on the call.

What happens if the gas company red-tags a furnace in Franklin?

The gas utility red-tags a furnace when it finds a leak or an unsafe appliance, and it shuts the gas off to it. The gas stays off until a contractor repairs the fault, and a cracked heat exchanger is often where a red tag turns a repair into a replacement.

Map loads when you reach it

Other services in Franklin

Furnace Replacement nearby

Call (888) 217-3739