Francis, UT
Furnace Replacement and Installation in Francis, UT
A new furnace in Francis, UT is sized from the house, its ducts and its winters, not from the rating plate of the one coming out. Francis has, on average, 196 days a year with a low of 32°F or colder and 87 at 20°F or colder (NOAA 1991–2020 normals, station in or next to town). Half the homes in Francis were built in 2001 or later (Census ACS 2019–2023). The federal minimum for a new non-weatherized gas furnace is an AFUE of 80, and a 95 standard for furnaces made after December 18, 2028 is still in court.
(888) 217-3739Utah contractors. No obligation for the call.
A furnace with one failed part and a furnace on its second service call of the season are asking different questions. Say roughly when it was installed and what it is doing, and a heating contractor can come out to Francis and answer that before anything is ordered.
Every time the burners light the steel expands, and every time they stop it contracts, and a crack is where that ends. That is not a failed part: the heat exchanger is the body of the machine rather than something bolted to it, and getting at one means stripping the furnace back to its cabinet. By then most of the decision has been made for you.
Which is why the month matters more here than almost anywhere. A changeout takes about one day, and for part of that day the house has no heat — an ordinary afternoon in September, a different proposition in January. A furnace that came through last winter on two repairs is a spring conversation, not a February one.
A changeout is the one visit where a second question is genuinely open, and nights below 20°F come often enough here to put it there: another gas furnace, or a heat pump with the furnace kept behind it. A heat pump working alone hands the shortfall to electric resistance strips on those nights, and the electric bill follows. Keeping the furnace as the backup instead of strips is what a contractor means by dual fuel, and the thermostat, the wiring and the gas connection are all apart on changeout day anyway.
Francis, UT in numbers
| Days a year with a low of 32°F or colder | 196 | NOAA 1991–2020 normals, station in or next to town |
|---|---|---|
| Days a year with a low of 20°F or colder | 87 | NOAA 1991–2020 normals |
| Average July dew point | 38°F | PRISM 1991–2020 normals |
| Median year homes were built | 2001 | Census ACS 2019–2023 |
| Households | 508 | Census ACS 2019–2023 |
| County | Summit County | Census Bureau |
| Federal minimum for a new split central AC | 13.4 SEER2 (North region) | DOE, 2023 standard |
Why furnaces do not fix themselves
A cracked heat exchanger does not stay the size it was when somebody found it. Every heating cycle opens it further, because heat moves the steel and the crack is where that movement collects.
When to stop and call
- The gas utility has tagged the furnace and shut the supply off.
- A technician has said the words heat exchanger, or a carbon monoxide alarm has gone off.
- The part it needs is on back order and the furnace was installed before 2010.
- The license
- Held by the contractor, not by this site, and issued where the work happens — Utah licenses at state level, at city level or not at all depending on the trade and the town. Ask for the number and the name it is held under: a trading name and the licensed entity are often not the same.
- The call
- Describing what the system is doing commits you to nothing. Nothing is booked until you say so.
- Coverage
- By town, not by region. Francis and the towns around it, and it shifts with who is taking calls at the hour you ring.
What the visit involves
- 01
The diagnosis
At the thermostat first, then at the furnace or the condenser, in the order the equipment runs. What the system is doing is established before any part is named.
- 02
The finding, out loud
What failed, whether it is the fault or a symptom of another one, and whether the repair suits the age of the system. A diagnostic visit is usually charged separately from the repair — ask whether it is credited if the work goes ahead, because that differs from one contractor to the next.
- 03
What happens after
A system that failed once in a season often fails again in it. Whether that is the same fault or a second one is worth asking while the technician is still there.
What to have ready when you call
- 01When the furnace went in, roughly, and its model number — the data plate inside the door carries both.
- 02Whether cooling runs through the same ductwork, and what the outdoor data plate gives as the refrigerant — R-410A, R-454B or R-22 — and the model number on that unit, which tells a contractor whether it only cools or heats as well.
- 03Where the appliance stands and what it vents into — a metal flue into a chimney, or a white plastic pipe through the wall — and whether a water heater shares that chimney, because one left alone on a flue sized for two appliances becomes its own piece of work. The address and ZIP code go with that.
The data plate inside the furnace door answers half the call, so have it in front of you — the year it went in and the model number. And if the gas utility left a tag on the appliance, leave the tag where it is: it names what has to be put right before the gas comes back.
Furnace Replacement in Francis: questions
How cold does Francis get in winter?
Francis averages 196 days a year with a low of 32°F or colder and 87 at 20°F or colder, by the 1991–2020 climate normals for the NOAA station in or next to town. Heating is the main system here, and a furnace that quits in January is an emergency rather than an inconvenience.
When were most houses in Francis built?
Half the homes in Francis were built in 2001 or later, by the Census Bureau's 2019–2023 American Community Survey. Detached houses make up almost all of the housing. Equipment in houses of that age is often on its second set, and the install date on the label decides whether parts are still made.
What efficiency does a new gas furnace in Francis need?
The federal minimum for a new non-weatherized gas furnace is an AFUE of 80. A 95 standard is set for furnaces made after December 18, 2028 and is still in court, so a furnace going in now can be an 80 or a condensing model in the 90s.
Other services in Francis
Furnace Replacement nearby