Aurora, CO
Furnace Replacement and Installation in Aurora, CO
Furnace replacement in Aurora, CO turns on three things: when the furnace went in, what failed, and how much heat the house actually needs. Aurora has, on average, 172 days a year with a low of 32°F or colder and 74 at 20°F or colder (NOAA 1991–2020 normals, station 8 miles away). Half the homes in Aurora were built before 1985 (Census ACS 2019–2023). The federal minimum for a new non-weatherized gas furnace is an AFUE of 80, and a 95 standard for furnaces made after December 18, 2028 is still in court.
(888) 217-3739Colorado contractors. No obligation for the call.
A furnace with one failed part and a furnace on its second service call of the season are asking different questions. Say roughly when it was installed and what it is doing, and a heating contractor can come out to Aurora and answer that before anything is ordered.
The steel expands every time the burners light and contracts every time they stop, and a crack is where that ends. A crack is not a part failure: the heat exchanger is the body of the machine rather than something bolted to it, and getting at one means stripping the furnace back to its cabinet. By then most of the decision has been made for you.
That is why the month matters more here than in most places. A changeout takes about one day, and for part of that day the house has no heat — an ordinary afternoon in September, a different proposition in January. A furnace that came through last winter on two repairs is worth raising in spring rather than in February.
A changeout is the one visit where a second question is genuinely open, and nights below 20°F come often enough here to put it there: another gas furnace, or a heat pump with the furnace kept behind it. A heat pump working alone hands the shortfall to electric resistance strips on those nights, and the electric bill follows. What a contractor means by dual fuel is keeping the furnace as the backup instead of strips, and the thermostat, the wiring and the gas connection are all apart on changeout day anyway.
Aurora, CO in numbers
| Days a year with a low of 32°F or colder | 172 | NOAA 1991–2020 normals, station 8 miles away |
|---|---|---|
| Days a year with a low of 20°F or colder | 74 | NOAA 1991–2020 normals |
| Average July dew point | 49°F | PRISM 1991–2020 normals |
| Median year homes were built | 1985 | Census ACS 2019–2023 |
| Households | 143,179 | Census ACS 2019–2023 |
| County | Arapahoe County | Census Bureau |
| Federal minimum for a new split central AC | 13.4 SEER2 (North region) | DOE, 2023 standard |
Why furnaces in Aurora do not fix themselves
A cracked heat exchanger does not stay the size it was when somebody found it. Every heating cycle opens it further, because heat moves the steel and the crack is where that movement collects.
When to stop and call in Aurora
- The gas utility has tagged the furnace and shut the supply off.
- This is the second service call on the same furnace in one heating season.
- The part it needs is on back order and the furnace was installed before 2010.
- The figure
- Set by the contractor and said before the work starts. This site never quotes and has no part in it. If a technician cannot say what the visit covers before beginning, that is the moment to stop.
- The call
- Describing what the system is doing commits you to nothing. Nothing is booked until you say so.
- Coverage
- By town, not by region. Aurora and the towns around it, and it shifts with who is taking calls at the hour you ring.
What a visit in Aurora involves
- 01
The diagnosis
At the thermostat first, then at the furnace or the condenser, in the order the equipment runs. What the system is doing is established before any part is named.
- 02
The finding, out loud
What failed, whether it is the fault or a symptom of another one, and whether the repair suits the age of the system. A diagnostic visit is usually charged separately from the repair — ask whether it is credited if the work goes ahead, because that differs from one contractor to the next.
- 03
What happens after
A system that failed once in a season often fails again in it. Whether that is the same fault or a second one is worth asking while the technician is still there.
Before you call: what to have ready
- 01When the furnace went in, roughly, and its model number — the data plate inside the door carries both.
- 02What the furnace is doing now — no heat at all, short cycling, a noise that started recently, or burners that light and drop out.
- 03Whether the gas utility has been out, and what the tag says word for word — the tag usually names the component.
The data plate inside the furnace door answers half the call, so have it in front of you — the year it went in and the model number. And if the gas utility left a tag on the appliance, leave the tag where it is: it names what has to be put right before the gas comes back.
Furnace Replacement in Aurora: questions
How cold does Aurora get in winter?
Aurora averages 172 days a year with a low of 32°F or colder and 74 at 20°F or colder, by the 1991–2020 climate normals for a NOAA station 8 miles away. Heating is the main system here, and a furnace that quits in January is an emergency rather than an inconvenience.
How old are the homes in Aurora?
Half the homes in Aurora were built before 1985, by the Census Bureau's 2019–2023 American Community Survey. Detached houses make up about half of the housing. Equipment in houses of that age is often on its second set, and the install date on the label decides whether parts are still made.
How efficient must a new gas furnace be?
The federal minimum for a new non-weatherized gas furnace is an AFUE of 80. A 95 standard is set for furnaces made after December 18, 2028 and is still in court, so a furnace going in now can be an 80 or a condensing model in the 90s.
Other services in Aurora
Furnace Replacement nearby